|
|
|
|
|
|
|
|
|
|
|
|
|
|
WORLDWIDE SOURCING Sillcock Wheel Handle, Suitable For Use With: 13/32 in Round 12 Point Stem, Zinc, 1-3/4 in Dia
|
Danco Valve Wheel Handle, Square Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel
|
Danco Valve Wheel Handle, Round Broach, Suitable For Use With: Hose Bibb Faucets, Sillcocks, Stopcocks and Valves, Metal, Stainless Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
WORLDWIDE SOURCING Sillcock Wheel Handle, Suitable For Use With: 0.4 - 0.35 in Square Stem
|
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
|
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Sillcock Faucet Handle, Square Stem, Wheel, 1-3/4 in Width
|
Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
|
Fits both schedule 40 and 80 pipes, spring-loaded poppet, stainless steel spring, O-ring seal, solvent ends comply with ASTM D2466. Not for use with compressed air.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fits most drainable valves. 3 styles of caps with washers included.
|
WORLDWIDE SOURCING Hose Bibb Handle, For T-Handle Lawn Faucet
|
12 point
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plumb Pak Sillcock Faucet Wheel Handle, Suitable For Use With: 1/4 in Square Stems
|
Rated for 150 PSI at 73 Deg. F., for use with cold-water applications, gray color, PTFE seats, EPDM O-rings. Threaded ends comply with ANSI B1.20.1. Certified to NSF 61-G. Lead-free compliant.
|
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
|
For use with cold-water applications, TPV seats, NBR O-rings, fits both schedule 40 and 80 pipes, solvent ends comply with ASTM D2466, certified to NSF 61-G.
|
For used with cold water applications,TPV seats NBR O-rings, fits both schedule 40 and 80 pipes, threaded ends comply with ANSI B1.20.1, certified to NSF 61-G.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PVC construction. For use in hot or cold fluid systems up to 140 degrees Fahrenheit. White color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards.
|
Valve is operate by a coin or screwdriver.
|
PVC construction. For use in hot or cold fluid systems up to 140 degrees Fahrenheit. White color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For hot and cold fluid systems up to 180 degrees Fahrenheit. Non-corroding, heavy-duty Calcon construction for use with corrosive fluids. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. IAPMO and NSF Listed.
|
For hot and cold fluid systems up to 180 degrees Fahrenheit. Non-corroding, heavy-duty Calcon construction for use with corrosive fluids. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards. IAPMO and NSF Listed.
|
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Low profile and compact economy design. PVC construction. 150 PSI rated at 730. (Not for use with compressed air). Solid Teflon seats. Large flow opening. White color. NSF standard listed.
|
CPVC construction. For use with hot or cold water. Rated for 100 PSI at 180 degrees Fahrenheit. Not for use with compressed air. Solvent connection for use with CPVC tubing size pipe. Solvent ends comply with ASTM 2846. Certified to NSF 61.
|
16 point
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For use with hot or cold water applications, PTFE seats, EPDM O-rings, solvent ends comply with ASTM D2466, certified to NSF 61-G.
|
Acetal copolymer construction for use in hot or cold fluid systems up to 180 degrees Fahrenheit. Use with water and approved chemicals. Bronze color body with red wheel handle. Santoprene seal for chemical resistance. Complies with all applicable ASTM and ANSI standards.
|
Bronze color body with red wheel handle. For hot and cold fluid systems up to 180 degrees Fahrenheit and 150 lbs. pressure. Complies with all applicable ASTM and ANSI standards.
|
|
|
