|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness.
|
Pre-slit to snap on quickly and easily. Black tubular polyethylene foam pipe insulation. Fits both copper and iron pipes. 3/8" Wall Thickness.
|
Insulates outside faucets to help prevent freezing.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Closed cell polyethylene foam. More thermally efficient. Cuts heat loss and stops pipe sweating. Helps stop freeze-ups. Contains flame retardants. Cut with scissors.
|
Blocks heat loss or gain to save energy. Use on hot or cold pipes. Stops condensation on cold pipes to prevent water damage. Pre-cut, self sealing slits for easy application
|
Made of a special UV metallized polypropylene film, with a high tack acrylic adhesive.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Insulates outside faucets to help prevent freezing.
|
Protects faucets from frigid weather, helps prevent frozen pipes, made from weather resistant rigid foam, easy to install.
|
Stops sweating and dripping on cold pipes. Cuts wasteful heat loos on hot water pipes. The kits consist of a roll of 1/2" thick fiberglass plus a length of plastic vapor barrier overwrap.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Insulates outside faucets to help prevent freezing.
|
Features 1/2" thick Owens Corning fiberglass insulation. Includes clear plastic wrap to provide moisture barrier.
|
1/8" thick, self adhesive vinyl foam and aluminum foil insulation tape for hot and cold pipes. 2"W x 15'L.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Polyvinyl chloride foam with aluminum shell that reflects heat. Adhesive closed-cell foam insulates and protects.
|
1" x 3" x 25' Foil-backed fiberglass pipe wrap with vapor barrier. Package covers 17' of 1/2" pipe, 12' of 3/4" pipe or 10' of 1" pipe. Stops sweating and dripping of cold pipes. Cuts wasteful heat loss on hot water pipes.
|
Features 1/2" thick Owens Corning fiberglass insulation. Includes clear plastic wrap to provide moisture barrier.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
High quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection.
|
Polyvinyl chloride foam with aluminum shell that reflects heat. Adhesive closed-cell foam insulates and protects.
|
High quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For electrical power connection and end sealing of Freeze Free pipe heating cable.
|
Temperature regulator used with freeze free pipe cable. On at 38 degrees F. Off at 50 degrees F.
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
Designed to prevent water line freeze up. Ready to install, grounded cord and plug, thermostat controlled with pilot light. UL and CSA approved. Install on pipes, then wrap with pipe insulation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
Designed to prevent water line freeze up. Ready to install, grounded cord and plug, thermostat controlled with pilot light. UL and CSA approved. Install on pipes, then wrap with pipe insulation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
Designed to prevent water line freeze up. Ready to install, grounded cord and plug, thermostat controlled with pilot light. UL and CSA approved. Install on pipes, then wrap with pipe insulation.
|
Temperature - controlled cable runs straight along pipe and valves, held in place by application tape and plugs into grounded electrical outlet. Keeps water flowing to -40. Pipe requires 1/2" non-flammable insulation such as fiberglass. For plastic pipe, its recommended wrapping pipe with aluminum foil before cable installation. The traditional resistance cable produces a fixed amount of heat based on the electrical line feed. It comes with a built-in thermostat that switches the flow of electricity on and off based on temperature. 120 volts. 7 watts per foot. CSA listed.
|
|
|
