Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR
Choose a sub category:
SHOWER HEADS SHOWER HEAD PARTS & ACCESS. TUB SPOUTS
TUB & SHOWER DRAINS/PARTS
Sort By:
1 2 3 ... 7
Oatey 43561 Snap-In Floor Drain Oatey 42042 Tile Rings Danco 80001 Tub Spout Ring
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. 4-1/4"  x 4-1/4" Stainless steel square tile ring. For use with the 151 Series Oatey drains. Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID.
Oatey 43569 Snap-In Floor Drain Danco 80002 Tub Spout Ring Plumb Pak PP826-64 Strainer Dome Cover
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID. Strainer dome cover with screw.
Oatey 43565 Snap-In Floor Drain Plumb Pak PP826-4 Flat Tub Overflow Washer Plumb Pak PP22612 Face Plate Screw
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Plumb Pak Tub Overflow Washer, Flat, Sponge Chrome plated face plate screws.
Danco 50673B Volume Control Washer Plumb Pak Water Saver Economy Showerhead Plumb Pak Water Saver Economy Showerhead
For shower heads with standard 1/2" IPS connection. Bagged. Installs to standard 1/2" shower arms. 2.0 gpm flow rate. Adjustable Spray. Installs to standard 1/2" shower arm. 2.5 GPM flow rate.
Mintcraft B1140WH Shower Arms Plumb Pak PP825-50 Shower Drain Grid Oatey 42787 Shower Drain
Standard 1/2", Plastic. Overall length 7". 3-5/16" O.D. 6.88" h x 4-3/4" w. 2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
Plumb Pak PP606-23 Clevis Plunger Linkage Assembly B & K 133-106 Shower Drain World Wide Sourcing PMB-020 Shower Adapters
For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger. For use on steel, fiberglass and other types of plastic shower bases. Solvent welds to 2" DWV or Schedule 40, ABS or PVC pipe. 4-1/2" flange diameter, with stainless steel grid. Shower flow adjuster. 1/2" IPS.
Plumb Pak PP825-7 Shower Arm Diverter World Wide Sourcing 24500 Bathtub Spouts World Wide Sourcing 24354 Bath Drain Trip Levers
Shower arm diverter, plated plastic, connects personal shower and shower head. 1/2" F.I.P. x 1/2" M.I.P. x 1/2" M.I.P Zinc body; chrome plated finish with reducer bushing. For 3/4'' or 1/2'' pipe. Zinc body. Screws included.
Mintcraft B1140CP Shower Arms Danco 80991 Round Bath Drain Overflow Plate With Lever Plumb Pak PP825-8 Shower Adapter Control
Standard 1/2", Plastic. Overall length 7". Includes screws. 2" center to center holes. Carded. Plated plastic. Flow control and shut off.
Plumb Pak PP863-50 Replacement Tip Toe Cartridge Plumb Pak PP826-10 1-Hole Trip lever Style Tub Face Plate Oatey Snap-Tite Round Drain Strainer
Threaded shaft. Plumb Pak Tub Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Chrome Plated 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded.
Oatey 42097 101 PS Shower Drain Whedon TV1C Shower Flow Controller Oatey 42086 101 PS Shower Drain
Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Installs easily between standard shower arm and head.  Push button control easily adjusts spray force from full to a trickle, great for saving while lathering, shampooing, etc. Made in USA Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
   
 
1 2 3 ... 7